Hydro Facial Cleaning Tips - Single Cap
SKU: A030
Hydro Facial Cleaning Tips – Single Cap. (Compatible with all Hydrafacial® systems)
A 2-minute cleaning will sufficiently rinse out the residue in the system, the tubing and the hand piece.
Not cleaning your system after use will possibly clog the machine and deteriorate your systems tubing.
Hydrafacial® is a trademark of Hydrafacial®,LLC. MPR is not associated with Hydrafacial®,LLC and HydraFacial®,LLC does not endorse, sponsor, support or associate with MPR or its products. Any reference to HydraFacial®,LLC or use of HydraFacial®,LLC’s trademarks herein is only to describe and identify the products bearing those marks.
- Brand Name: 1 MPR
- Part Number: A030
Hydro Facial Cleaning Tips – Single Cap.
A 2-minute cleaning will sufficiently rinse out the residue in the system, the tubing and the hand piece.
Not cleaning your system after use will possibly clog the machine and deteriorate your systems tubing.
Cleaning your system tubing each day prevents clogging and deterioration of your systems tubing.
A 2-minute cleaning will sufficiently rinse out the residue in the system, the tubing and the handpiece. As per your Owner’s Manual, Service Protocol Manual and Training, cleaning the system after each treatment is required. The cleaning cap occludes the handpiece and lets the cleaning solution run through out your system for 2 minutes. Not cleaning your system after use will possibly clog the machine.
Hydrafacial® System Cleaning Procedure
1. Wearing gloves is recommended.
2. After each procedure and /or end of day, run the “system cleaning process”. Start by switching all the blue toggle switches down to the “OFF” position, and switch only the gray toggle switch “SYSTEM RINSE” up to the “ON” position.
3. Make sure that the “Rinse N Clean / Rinseaway™” system cleaning solution is properly installed. Partially used skin solution bottles must be capped and stored in a cool place.
4. Turn the unit on and set vacuum setting to 26.
5. Use the cleaning cap (as shown) to occlude the handpiece and let the cleaning process run for 2 minutes. The cleaning cap can also be used as a protective cap.
6. When completed, be sure to switch the toggle switch to the “OFF” position.
7. Empty the waste on the back of the unit at the end of each service day. Do not let the waste container overfill.
8. Wash, dry, and wipe/spray germicide over waste canister and lid. Leave
open overnight to air dry.
Product Reviews
There are no reviews yet.