Device: Made of Titanium Alloy material
Needle Cartridge: Stainless Steel
How to Operate
1. Setting in Adapter Mode (Corded mode)
(a) Plug in DC adapter to the jack.
(b) Plug in DC adapter to AC outlet.
2. Preparation
(a) Take out needle cartridge in the sterilized packing.
(b) Fitting round slots in to device, push needles cartridge horizontally up to the end.
(c) Lock the cartridge by turning it counter clockwise.
(d) Adjustment of needles length should be done after the device is turned on.
(e) If you want to remove the needle cartridge ,turn cartridge clockwise and push out horizontally.
3. Adjustment of speed and needle length
(a) Adjustment of Speed and ON/OFF
(b) 5 speed level control
Pressing the switch 2 seconds to turn on the device.
It will start from the lowest speed to highest speed when you first turn on the device.
The speed cycles low to high. Please press the switch 2 seconds when you need to stop the device.
The flickering frequency of light faster indicates the speed is higher .
4. Adjustment of needles length
You can adjust the length of needle by turning the adjustment ring clockwise or counter clockwise .
Turning it clockwise, needles will extend out for longer depth.
Turning it counter clockwise, needles will withdraw in for shorter depth.
Advantages:
* Visual and noticeable improvement in a few days from the first treatment.
* Short healing time.
* No permanent damage or injury.
* No bruising, infection, discoloration or other complications.
* Extremely high absorption of any active ingredients.
* Almost all skin types can be treated.
* Thickens the dermis without damaging or removing epidermis.
Functions:
Anti-Puffiness
* Scar removal including acne scar removal or treatment.
* Acne Scar Removal, Acne Scar Treatment.
* Anti Wrinkle Treatment, Anti Aging.
* Hair Loss Treatment or Hair Restoration.
* Surgical Scar Removal.
* Hyper pigmentation treatment.
* Treatment of acne scars and healing wounds.
Features:
Twelve needle function:
1. Automatic high speed roll(max speed(8000~18000) turn per minute), producing Twelve delivery channels.
2. Various micro-needle mode to stimulate skin:
a. Strengthens skin to absorb serums and active ingredients, the absorbency of the skin can be improved 40%, and improve acne scar appearance more than 50%.
b. The skin will be lusterous and elastic, different from laser or chemical treatments, it is non-invasive, can improve skin appearance and enhances absorption of serums or active ingredients.
3. The micro-needle of depth can be adjusted(0.25mm-2.5mm), greatly improved the treatment.
Features of Twelve needle:
a. Five different speeds
b. Easier to operate in small areas
c. More quickly and efficient than manual MTS Micro-needle
d. Adjustable length of micro-needles(0.25mm-2.5mm)
e. High-speed vertical movement reduces pain, there is no cross-infection, uses a single use disposable needle cartridge.
My MPR Micropen battery will not hold a charge.
How do I charge the battery for my MPR Micropen device?
In regards to charging the battery for your MPR Micropen. Use the white wall plug adapter that comes with your system. You will select the with power cable which will plug into the battery and the USB connection to the back of the wall plug adapter. The battery should not be attached to the pen device while charging. The light on the plug adapter should turn red while charging (you may need to press the power button on the battery to initiate the charge). Once the battery is completely charged, the light will turn green. This process will take about 2-3 hours.
Which micropen needle cartridge do I use for the MPR Micropen device?
The intended needle cartridge which is used for the MRP Micropen is the needle cartridge part# 1951BB also labeled SP II Needle Cartridge.
Reviews
There are no reviews yet.